Updated 9 files via CloudCannon.

Author: bharvey88

docs/assets/2d-config-128-width.gif

@@ -16,7 +16,7 @@ Your device is ready to connect to your Wi-Fi and begin controlling via Home Ass
 
 2\. Tap on **WI-FI Settings** then input your Wi-Fi SSID where it shows **Your\_Network** and input your Wi-Fi password directly below it and then click **Save and Connect**.
 
-!!! tip "You can also set your hostname here such as \"apollo-led-matrix\" or similar"
+!!! tip "You can also set your hostname here such as apollo-led-matrix"
 
     Later, you can use this to access your device at http://apollo-led-matrix.local in a browser instead of using the IP address!
 
@@ -60,4 +60,4 @@ Your device is ready to connect to your Wi-Fi and begin controlling via Home Ass
 
 ![](../../../assets/m-1-setup-wled-integration-test-device.png)
 
-[Click here to learn how to create your own presets!](https://wiki.apolloautomation.com/products/m1/examples/create-logo-image/){         .md-button .md-button--primary }
+[Click here to learn how to create your own presets!](https://wiki.apolloautomation.com/products/m1/examples/create-logo-image/){          .md-button .md-button--primary }

docs/assets/2d-config-192-width.gif

@@ -58,18 +58,48 @@ Choose the number of panels you are using below to get started!
 
 === "Two Panels"
 
-    1\. Open WLED and head to the LED Settings
+    1\. Navigate to your WLED instance in a browser or using the WLED-native app on your phone. You can use http://your-hostname-here.local or its IP address. <a href="https://wiki.apolloautomation.com/products/m1/troubleshooting/m1-find-ip-address-and-hostname/" target="_blank" rel="noreferrer nofollow noopener">Click here if you need to find your IP or hostname</a>.
 
-    2\.
+    2\. Click on **Config**, then **LED Preferences**. set **Chain Length** to **2** then **Save**.
+
+    ![](../../../assets/chain-length-2-gif.gif)
+
+    3\. Click on **Config**, then **2D Configuration** and change the **Panel Dimensions** to **128 x 64** and click **Save**.
+
+    ![](../../../assets/2d-config-128-width.gif)
+
+    4\. Reboot WLED before proceeding. Tap **Info** at the top, scroll down, and select **Reboot WLED**. When prompted, tap again to confirm the reboot.
+
+    ![](../../../assets/reboot-wled-gif.gif)
 
 === "Three Panels"
 
-    1\. Open WLED and head to the LED Settings
+    1\. Navigate to your WLED instance in a browser or using the WLED-native app on your phone. You can use http://your-hostname-here.local or its IP address. <a href="https://wiki.apolloautomation.com/products/m1/troubleshooting/m1-find-ip-address-and-hostname/" target="_blank" rel="noreferrer nofollow noopener">Click here if you need to find your IP or hostname</a>.
+
+    2\. Click on **Config**, then **LED Preferences**. set **Chain Length** to **3** then **Save**.
+
+    ![](../../../assets/chain-length-3-gif.gif)
+
+    3\. Click on **Config**, then **2D Configuration** and change the **Panel Dimensions** to **192 x 64** and click **Save**.
 
-    2\.
+    ![](../../../assets/2d-config-192-width.gif)
+
+    4\. Reboot WLED before proceeding. Tap **Info** at the top, scroll down, and select **Reboot WLED**. When prompted, tap again to confirm the reboot.
+
+    ![](../../../assets/reboot-wled-gif.gif)
 
 === "Four Panels"
 
-    1\. Open WLED and head to the LED Settings
+    1\. Navigate to your WLED instance in a browser or using the WLED-native app on your phone. You can use http://your-hostname-here.local or its IP address. <a href="https://wiki.apolloautomation.com/products/m1/troubleshooting/m1-find-ip-address-and-hostname/" target="_blank" rel="noreferrer nofollow noopener">Click here if you need to find your IP or hostname</a>.
+
+    2\. Click on **Config**, then **LED Preferences**. set **Chain Length** to **4** then **Save**.
+
+    ![](../../../assets/chain-length-4-gif.gif)
+
+    3\. Click on **Config**, then **2D Configuration** and change the **Panel Dimensions** to **256 x 64** and click **Save**.
+
+    ![](../../../assets/2d-config-256-width.gif)
+
+    4\. Reboot WLED before proceeding. Tap **Info** at the top, scroll down, and select **Reboot WLED**. When prompted, tap again to confirm the reboot.
 
-    2\.
+    ![](../../../assets/reboot-wled-gif.gif)