Add support for Avatto WSMD-4 (TS0601) 4 channel relay (_TZE204_f5efvtbv)

[eduperez]

I own this device, and would like to see it supported by zigbee2mqtt. I have tried to follow the "Support new devices" document, but I am still very lost. I somebody could guide me to add support for this device, I would be very grateful.

[eduperez]

This is what I see during the interview:

[2025-01-25 22:05:46] info:     z2m: Starting interview of '0xa4c138bf4caa1b84'
[2025-01-25 22:05:46] info:     z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0xa4c138bf4caa1b84","ieee_address":"0xa4c138bf4caa1b84"},"type":"device_joined"}'
[2025-01-25 22:05:46] info:     z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0xa4c138bf4caa1b84","ieee_address":"0xa4c138bf4caa1b84","status":"started"},"type":"device_interview"}'
[2025-01-25 22:05:46] info:     z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0xa4c138bf4caa1b84","ieee_address":"0xa4c138bf4caa1b84"},"type":"device_announce"}'
[2025-01-25 22:05:46] info:     zh:controller:device: Device '0xa4c138bf4caa1b84' is only compliant to revision '21' of the ZigBee specification (current revision: 23).
[2025-01-25 22:05:47] info:     zh:controller: Succesfully interviewed '0xa4c138bf4caa1b84'
[2025-01-25 22:05:47] info:     z2m: Successfully interviewed '0xa4c138bf4caa1b84', device has successfully been paired
[2025-01-25 22:05:47] warning:  z2m: Device '0xa4c138bf4caa1b84' with Zigbee model 'TS0601' and manufacturer name '_TZE204_f5efvtbv' is NOT supported, please follow https://www.zigbee2mqtt.io/advanced/support-new-devices/01_support_new_devices.html
[2025-01-25 22:05:47] info:     z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/bridge/event', payload '{"data":{"friendly_name":"0xa4c138bf4caa1b84","ieee_address":"0xa4c138bf4caa1b84","status":"successful","supported":false},"type":"device_interview"}'
[2025-01-25 22:06:35] info:     z2m:mqtt: MQTT publish: topic 'zigbee2mqtt/0xa4c138bf4caa1b84', payload ''

[eduperez]

I have managed to make it "supported", but still nothing is exposed:

const tuya = require('zigbee-herdsman-converters/lib/tuya');

const definition = {
        fingerprint: [
                {
                        modelID: 'TS0601',
                        manufacturerName: '_TZE204_f5efvtbv',
                },
        ],
        model: 'TS0601',
        vendor: 'Tuya',
        description: 'Avatto WSMD-4 (TS0601) 4 channel relay',
        fromZigbee: [tuya.fz.datapoints],
        toZigbee: [tuya.tz.datapoints],
        configure: tuya.configureMagicPacket,
        exposes: [],
        extend: [],
        meta: {},
};

module.exports = definition;

[eduperez]

This adds support for the device:

const tuya = require('zigbee-herdsman-converters/lib/tuya');

const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');

const exposes      = require('zigbee-herdsman-converters/lib/exposes');
const reporting    = require('zigbee-herdsman-converters/lib/reporting');
const modernExtend = require('zigbee-herdsman-converters/lib/modernExtend');

const e  = exposes.presets;
const ea = exposes.access;

const definition = {
        fingerprint: [
                {
                        modelID: 'TS0601',
                        manufacturerName: '_TZE204_f5efvtbv',
                },
        ],
        model: 'TS0601',
        vendor: 'Tuya',
        description: 'Avatto WSMD-4 (TS0601) 4 channel relay',
        fromZigbee: [tuya.fz.datapoints],
        toZigbee: [tuya.tz.datapoints],
        configure: tuya.configureMagicPacket,
        meta: {                     
                multiEndpoint: true, 
                tuyaDatapoints: [                                              
                        [1, 'state_l1', tuya.valueConverter.onOff],            
                        [2, 'state_l2', tuya.valueConverter.onOff],            
                        [3, 'state_l3', tuya.valueConverter.onOff],            
                        [4, 'state_l4', tuya.valueConverter.onOff],            
                ],                                                             
        },                                                                   
        exposes: [                                                                             
                tuya.exposes.switch().withEndpoint('l1'),                                      
                tuya.exposes.switch().withEndpoint('l2'),                                      
                tuya.exposes.switch().withEndpoint('l3'),                                      
                tuya.exposes.switch().withEndpoint('l4'),                                      
        ],                                                                                     
        endpoint: (device) => {                                                                
                return {l1: 1, l2: 1, l3: 1, l4: 1};                                           
        },                                                                                     
        extend: [],                                                                            
};                                                                                             
                                                                                               
module.exports = definition;                                                                   

Looks like it's just a renamed "TS0601_switch_4_gang_1".

[Koenkk]

Could you make a PR by clicking here?

[eduperez]

Done: Koenkk/zigbee-herdsman-converters#8690

[jack338c]

This adds support for the device:

const tuya = require('zigbee-herdsman-converters/lib/tuya');

const fz = require('zigbee-herdsman-converters/converters/fromZigbee');
const tz = require('zigbee-herdsman-converters/converters/toZigbee');

const exposes      = require('zigbee-herdsman-converters/lib/exposes');
const reporting    = require('zigbee-herdsman-converters/lib/reporting');
const modernExtend = require('zigbee-herdsman-converters/lib/modernExtend');

const e  = exposes.presets;
const ea = exposes.access;

const definition = {
        fingerprint: [
                {
                        modelID: 'TS0601',
                        manufacturerName: '_TZE204_f5efvtbv',
                },
        ],
        model: 'TS0601',
        vendor: 'Tuya',
        description: 'Avatto WSMD-4 (TS0601) 4 channel relay',
        fromZigbee: [tuya.fz.datapoints],
        toZigbee: [tuya.tz.datapoints],
        configure: tuya.configureMagicPacket,
        meta: {                     
                multiEndpoint: true, 
                tuyaDatapoints: [                                              
                        [1, 'state_l1', tuya.valueConverter.onOff],            
                        [2, 'state_l2', tuya.valueConverter.onOff],            
                        [3, 'state_l3', tuya.valueConverter.onOff],            
                        [4, 'state_l4', tuya.valueConverter.onOff],            
                ],                                                             
        },                                                                   
        exposes: [                                                                             
                tuya.exposes.switch().withEndpoint('l1'),                                      
                tuya.exposes.switch().withEndpoint('l2'),                                      
                tuya.exposes.switch().withEndpoint('l3'),                                      
                tuya.exposes.switch().withEndpoint('l4'),                                      
        ],                                                                                     
        endpoint: (device) => {                                                                
                return {l1: 1, l2: 1, l3: 1, l4: 1};                                           
        },                                                                                     
        extend: [],                                                                            
};                                                                                             
                                                                                               
module.exports = definition;                                                                   

Looks like it's just a renamed "TS0601_switch_4_gang_1".

How to edit this like yours,I mean where is the path or folder name?
my device has simler issue
thanks
by the way,my z2m is docker version

[eduperez]

@jack338c : The post above yours has a link to the PR, where you can find all the changes, including the files that were modified.

[jack338c]

@jack338c : The post above yours has a link to the PR, where you can find all the changes, including the files that were modified.

Thank you ,according to tuya.ts. and Support new Tuya devices
,I tried to add my model to the following code,but it's no lucky.always get gan.js.invalid when restart z2m.I don't know how rewrite this.Could you help me
_TZ3000_uz6ibhib is my mode

const tz = require('zigbee-herdsman-converters/converters/toZigbee');
const exposes = require('zigbee-herdsman-converters/lib/exposes');
const reporting = require('zigbee-herdsman-converters/lib/reporting');
const modernExtend = require('zigbee-herdsman-converters/lib/modernExtend');
const e = exposes.presets;
const ea = exposes.access;
const tuya = require('zigbee-herdsman-converters/lib/tuya');

const definition = {
    // Since a lot of Tuya devices use the same modelID, but use different datapoints
    // it's necessary to provide a fingerprint instead of a zigbeeModel
    fingerprint: tuya.fingerprint("TS0726", ["_TZ3000_uz6ibhib"]),
    model: "TS0726_4_gang",
    vendor: 'Tuya',
    description: "4 gang switch",
    fromZigbee: [fz.on_off, tuya.fz.power_on_behavior_2, fzLocal.TS0726_action],
    toZigbee: [tz.on_off, tuya.tz.power_on_behavior_2, tzLocal.TS0726_switch_mode],
    exposes: [
            ...[1, 2, 3, 4].map((ep) => e.switch().withEndpoint(`l${ep}`)),
            ...[1, 2, 3, 4].map((ep) => e.power_on_behavior().withEndpoint(`l${ep}`)),
            ...[1, 2, 3, 4].map((ep) => e.enum("switch_mode", ea.STATE_SET, ["switch", "scene"]).withEndpoint(`l${ep}`)),
            e.action(["scene_1", "scene_2", "scene_3", "scene_4"]),
        ],
        endpoint: (device) => {
            return {l1: 1, l2: 2, l3: 3, l4: 4};
        },
    meta: {multiEndpoint: true},
    configure: async (device, coordinatorEndpoint) => {
            await tuya.configureMagicPacket(device, coordinatorEndpoint);
            for (const ep of [1, 2, 3, 4]) {
                await reporting.bind(device.getEndpoint(ep), coordinatorEndpoint, ["genOnOff"]);
            }
    },
};

module.exports = definition;```

[kalagan55]

Hello, how do I do this with this version AVATTO ZWSMD-4 ? I tried but without success.
#3962
#8646

[Koenkk]

Added!

Changes will be available in the dev branch in a few hours from now and in the next release which is every 1st of the month.