diff --git a/configs/AXISFLYINGH7MINI/config.h b/configs/AXISFLYINGH7MINI/config.h new file mode 100644 index 000000000..5f9e986f1 --- /dev/null +++ b/configs/AXISFLYINGH7MINI/config.h @@ -0,0 +1,142 @@ +/* + * This file is part of Betaflight. + * + * Betaflight is free software. You can redistribute this software + * and/or modify this software under the terms of the GNU General + * Public License as published by the Free Software Foundation, + * either version 3 of the License, or (at your option) any later + * version. + * + * Betaflight is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this software. + * + * If not, see . + */ + +#pragma once + +#define FC_TARGET_MCU STM32H743 + +#define BOARD_NAME AXISFLYINGH7MINI +#define MANUFACTURER_ID AXFL + +#define USE_ACC +#define USE_ACC_SPI_ICM42688P +#define USE_GYRO +#define USE_GYRO_SPI_ICM42688P +#define USE_BARO +#define USE_BARO_DPS310 +#define USE_FLASH +#define USE_FLASH_W25Q128FV +#define USE_MAX7456 + +#define BEEPER_PIN PA15 + +#define MOTOR1_PIN PA0 +#define MOTOR2_PIN PA1 +#define MOTOR3_PIN PA2 +#define MOTOR4_PIN PA3 +#define MOTOR5_PIN PD12 +#define MOTOR6_PIN PD13 +#define MOTOR7_PIN PD14 +#define MOTOR8_PIN PD15 + +#define LED_STRIP_PIN PA8 + +#define UART1_TX_PIN PA9 +#define UART2_TX_PIN PD5 +#define UART3_TX_PIN PD8 +#define UART4_TX_PIN PB9 +#define UART6_TX_PIN PC6 +#define UART7_TX_PIN PE8 +#define UART8_TX_PIN PE1 + +#define UART1_RX_PIN PA10 +#define UART2_RX_PIN PD6 +#define UART3_RX_PIN PD9 +#define UART4_RX_PIN PB8 +#define UART6_RX_PIN PC7 +#define UART7_RX_PIN PE7 +#define UART8_RX_PIN PE0 + +#define I2C1_SCL_PIN PB6 // external +#define I2C1_SDA_PIN PB7 +#define I2C2_SCL_PIN PB10 // internal +#define I2C2_SDA_PIN PB11 + +#define LED0_PIN PE3 +#define LED1_PIN PE4 + +#define SPI1_SCK_PIN PA5 // imu1 +#define SPI2_SCK_PIN PB13 // osd +#define SPI3_SCK_PIN PB3 // flash +#define SPI4_SCK_PIN PE12 // imu2 +#define SPI1_SDI_PIN PA6 +#define SPI2_SDI_PIN PB14 +#define SPI3_SDI_PIN PB4 +#define SPI4_SDI_PIN PE13 +#define SPI1_SDO_PIN PD7 +#define SPI2_SDO_PIN PB15 +#define SPI3_SDO_PIN PB5 +#define SPI4_SDO_PIN PE14 + +#define ADC_VBAT_PIN PC0 +#define ADC_CURR_PIN PC1 +#define ADC_EXTERNAL1_PIN PA7 + +#define PINIO1_PIN PD10 +#define PINIO2_PIN PE2 + +#define FLASH_CS_PIN PD4 +#define MAX7456_SPI_CS_PIN PB12 +#define GYRO_1_EXTI_PIN PE10 +#define GYRO_1_CS_PIN PC15 +#define GYRO_2_EXTI_PIN PB2 +#define GYRO_2_CS_PIN PC13 + +#define TIMER_PIN_MAPPING \ + TIMER_PIN_MAP( 0, MOTOR1_PIN, 1, 0 ) \ + TIMER_PIN_MAP( 1, MOTOR2_PIN, 2, 1 ) \ + TIMER_PIN_MAP( 2, MOTOR3_PIN, 1, 2 ) \ + TIMER_PIN_MAP( 3, MOTOR4_PIN, 2, 3 ) \ + TIMER_PIN_MAP( 4, MOTOR5_PIN, 1, 4 ) \ + TIMER_PIN_MAP( 5, MOTOR6_PIN, 2, 5 ) \ + TIMER_PIN_MAP( 6, MOTOR7_PIN, 1, 6 ) \ + TIMER_PIN_MAP( 7, MOTOR8_PIN, 2, -1 ) \ + TIMER_PIN_MAP( 8, LED_STRIP_PIN, 1, 7 ) + +#define ADC1_DMA_OPT 8 +#define ADC2_DMA_OPT 9 +#define ADC3_DMA_OPT 10 + +#define MAG_I2C_INSTANCE I2CDEV_1 +#define BARO_I2C_INSTANCE I2CDEV_2 + +#ifdef USE_OSD_HD +#define MSP_DISPLAYPORT_UART SERIAL_PORT_USART1 +#endif +#define SERIALRX_UART SERIAL_PORT_USART2 +#ifdef USE_GPS +#define GPS_UART SERIAL_PORT_USART3 +#endif +#define ESC_SENSOR_UART SERIAL_PORT_UART4 + +#define DEFAULT_BLACKBOX_DEVICE BLACKBOX_DEVICE_FLASH +#define DEFAULT_DSHOT_BITBANG DSHOT_BITBANG_ON +#define DEFAULT_CURRENT_METER_SOURCE CURRENT_METER_ADC +#define DEFAULT_VOLTAGE_METER_SOURCE VOLTAGE_METER_ADC +#define BEEPER_INVERTED +#define PINIO1_CONFIG 129 +#define PINIO1_BOX 40 +#define PINIO2_CONFIG 129 +#define PINIO2_BOX 41 +#define GYRO_1_SPI_INSTANCE SPI1 +#define GYRO_2_SPI_INSTANCE SPI4 +#define FLASH_SPI_INSTANCE SPI3 +#define MAX7456_SPI_INSTANCE SPI2