ytuner not found - Link to libc manually created - OpenWRT on Bananapi-R4

[avbohemen]

Hi all, newbie to ytuner here. I want to run ytuner on my BananaPi-R4 router running OpenWRT. That is a aarch64/ARMv8 device. Kernel is 6.12.40 (self-compiled trunk build). I tried the following, simple, setup:

• downloaded the ytuner-1.2.6-aarch64-arm64-armv7-armv8-armv9-linux.zip file and extracted it to my router (to /etc for testing)
• Converted all ini/yaml files from DOS to UNIX line endings
• added a second fixed ipv4-address to my router (192.168.1.2, next to 192.168.1.1), and configured the LuCI web interface to only use the first ip (so I get no conflict on port 80) and confirmed it is working as expected.
• Changed the following in ytuner.ini:

• IPAddress=192.168.1.2

• WebServerIPAddress=192.168.1.2

• [DNSserver] Enable=0

• Added the following in /etc/config/dhcp:

• config dnsmaq

•     list address '/vtuner.com/192.168.1.2'
  

•     list address '/*.vtuner.com/192.168.1.2'
  

• Verified name resolving for vtuner.com is pointing to second-ip (yes it is)
• chmod 755 ytuner
• Tried starting ytuner:

root@router:/etc/ytuner# ./ytuner
-ash: ./ytuner: not found

Not found?? It is absolutely there... or is something else not found? Is the aarch64 binary correct?

[TheBossME]

@avbohemen newbie to ytuner maybe ... but not a newbie, you're on the right way !

Have you the needed libraries installed, ?. SQLite as an example ?. Running as root to use the system reserved ports ?

I'm pretty sure it will work soon !.

ldd ./ytuner

readelf -a ./ytuner | grep interpreter

Regards
Beatrice

[avbohemen]

I found this: #37 :)

root@router:/lib# ldd /etc/ytuner/ytuner
        /lib/ld-linux-aarch64.so.1 (0x7fb1350000)
        libpthread.so.0 => /lib/ld-linux-aarch64.so.1 (0x7fb1350000)
        libdl.so.2 => /lib/ld-linux-aarch64.so.1 (0x7fb1350000)
        librt.so.1 => /lib/ld-linux-aarch64.so.1 (0x7fb1350000)
        libsqlite3.so.0 => /usr/lib/libsqlite3.so.0 (0x7fb122b000)
        libc.so.6 => /lib/ld-linux-aarch64.so.1 (0x7fb1350000)
        libz.so.1 => /usr/lib/libz.so.1 (0x7fb11fa000)
        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x7fb11c9000)

Then did: ln -s /lib/ld-musl-aarch64.so.1 /lib/ld-linux-aarch64.so.1

That did the trick :)

root@router:/lib# /etc/ytuner/ytuner
YTuner v1.2.6 Copyright (c) 2024 Greg P. (https://github.com/coffeegreg)
7-8-25 16:18:10 : Inf : Starting services...
7-8-25 16:18:10 : Inf : Successfully loaded 10 my stations.
7-8-25 16:18:10 : Inf : Getting Radio-browser.info UUIDs...
7-8-25 16:18:10 : Inf : Web Service: listening on: 192.168.1.2:80.
7-8-25 16:18:10 : Dbg : Radio-browser.info: GET stations.
7-8-25 16:18:19 : Inf : Successfully downloaded 53642 RB UUIDs.
7-8-25 16:18:20 : Inf : Successfully saved 53642 RB UUIDs to cache file.

And I can hereby confirm that YTuner is working on my Marantz SR7008 happy

Edit: /lib/ld-musl-aarch64.so.1 is also a link. So ln -s /lib/libc.so /lib/ld-linux-aarch64.so.1 is just fine.

[TheBossME]

@avbohemen congratulations👍🙋‍♀️

What I'm saying you're on the right way.
Thanks confirming your marantz is running fine now.

Regards
Beatrice

[avbohemen]

So far I think I don't need much more done. A start/stop script is nice, but starting via rc.local is good enough too:
I added /etc/ytuner/ytuner > /var/run/ytuner/ytuner.log & to it.

I moved the cache and db directories to ram (/var/run) so the flash memory does not wear out. Radio-browser is nice to find stations although the user interface on my Marantz is quite slow. So I put all my favorites directly in stations.ini. I am quite happy with ytuner!