vTuner stops providing services for more and more devices. Let's help each other! Tell or write to others about YTuner and help others to bring their devices back to life! #66
Replies: 27 comments 39 replies
-
|
Hi Greg, Once we got my Pro-Ject Stream Boxes finally up and running I will contact their support organization and show them how it will work with ytuner. Kind regards from Vienna Arno |
Beta Was this translation helpful? Give feedback.
-
|
Hi, I really need your help for still using my PIONEER X-SMC5-K which is working properly but no more available to find internet radio using VTUNER ... could you please tell what to do in order to solve this issue. Huge thanks for reading my message. |
Beta Was this translation helpful? Give feedback.
-
Questions please :
|
Beta Was this translation helpful? Give feedback.
-
|
Hi,
DNS mask Numbers are to be encodéd into my net radio configuration that’s
for sure.
My router is Proximus box in belgium.
Not sure i can answer to your question more precisely.
Le sam. 15 mars 2025 à 12:16, Bea de Val ***@***.***> a
écrit :
… Other idea, or question. Are you able to redirect domains on your router.
I mean dnsmasq your router should redirect vtuner to an ip address
different than vtuner.
What router type model are you using. Openwrt does support it.
—
Reply to this email directly, view it on GitHub
<#66 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BQOBF4EDHBVC2SJSRO2IHND2UQDZRAVCNFSM6AAAAABWKLG2JCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENJQHEYDEMQ>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
- Set Preferred DNS AND Alternate DNS on your PIONEER X-SMC5-K to
*192.168.2.122* *This was done as requested*
- *adresse IP static* : I put the IPV4 address provided by my PC
(because I guess it was my IP address the radio needed) so I
encoded : *192.168.1.21
was encoded*
- For the *subnet mask* I did not know what to encode then i let *255
255 255 0* which was originally encoded
- For the "*adresse passerelle"* I did not know what to encode .... I
must check but I think I put the same as IPV4 above then : *192.168.1.21*
Tell me what is wrong ... ?
Le sam. 15 mars 2025 à 13:02, Bea de Val ***@***.***> a
écrit :
… have you set your dns records in your radio to the one I have offered ?
—
Reply to this email directly, view it on GitHub
<#66 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BQOBF4DLCBPH2SIX5QENWHD2UQJFVAVCNFSM6AAAAABWKLG2JCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENJQHEZDOMI>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
--
|
Beta Was this translation helpful? Give feedback.
-
|
- Set Preferred DNS AND Alternate DNS on your PIONEER X-SMC5-K to
*192.168.2.122* *This was done as requested*
- *adresse IP static* : I put the IPV4 address provided by my PC
(because I guess it was my IP address the radio needed) so I
encoded : *192.168.1.21
was encoded*
- For the *subnet mask* I did not know what to encode then i let *255
255 255 0* which was originally encoded
- For the "*adresse passerelle"* I did not know what to encode .... I
must check but I think I put the same as IPV4 above then : *192.168.1.21*
Tell me what is wrong ... ?
Le sam. 15 mars 2025 à 13:02, Bea de Val ***@***.***> a
écrit :
… have you set your dns records in your radio to the one I have offered ?
—
Reply to this email directly, view it on GitHub
<#66 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BQOBF4DLCBPH2SIX5QENWHD2UQJFVAVCNFSM6AAAAABWKLG2JCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENJQHEZDOMI>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
--
|
Beta Was this translation helpful? Give feedback.
-
I thought this line came from your running YTuner log 👀
Beatrice started speaking French... 👀 This girl is full of surprises 👍 😉 @EMMYCO7 I have stopped sharing YTuner binaries for M$ Windows due to this : #87 |
Beta Was this translation helpful? Give feedback.
-
|
Hi,
I will try the french forum you mentioned above.
However, I am afraid the language used is not an issue for me, especially
when talking about computer.
I just would like to understand clearly the whole process in theory before
loading anything I totally do not know about on my portable PC ...
What I understood correctly I think is that there is no way to load YTUNER
12.6 directly from the net, there is a need to create a virtual server,
then loading Ytuner and then knowing which IP static, gateway (passerelle
in french ?), masks number etc to configure on my radio.
But how to do technically this ? remains really vague for me. I am retired,
and previously worked as Analyst/Programmer SAS (statistical analysis
system), I do not have a clue on working with servers ... this was out of
my range.
Sincerely hoping my netradio will be back to found internet radio as in the
past.
Thanks for all your quick replies.
Le sam. 15 mars 2025 à 21:41, Greg ***@***.***> a écrit :
… @EMMYCO7 <https://github.com/EMMYCO7>
28-2-25 12:50:44 : Inf : DNS Service: listening on: 192.168.2.122:53.
I thought this line came from your running YTuner log 👀
Forget about 192.168.2.122 as your Preferred DNS and Alternate DNS.
@TheBossME <https://github.com/TheBossME>
Il n'existe pas de version spéciale de Windows pour ytuner....
Beatrice started speaking French... 👀 This girl is full of surprises 👍 😉
@EMMYCO7 <https://github.com/EMMYCO7>
If you need help and want to start a conversation in French, try this
French forum : https://vintage-audio-heritage.fr
Perhaps @Freleo <https://github.com/Freleo> or @PapyRadio2022
<https://github.com/PapyRadio2022> from this forum will explain to you
exactly in your native language what is needed to run YTuner. 🤔
Here is the vintage-audio-heritage forum thread about YTuner :
https://vintage-audio-heritage.fr/viewtopic.php?t=15745
I have stopped sharing Ytuner binaries for M$ Windows due to this : #87
<#87>
—
Reply to this email directly, view it on GitHub
<#66 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BQOBF4GOLVILTQAUPPZLIFL2USF6JAVCNFSM6AAAAABWKLG2JCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENJRGIYDSMI>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
--
|
Beta Was this translation helpful? Give feedback.
-
|
@EMMYCO7
and enter this IP address into your Pioneer's DNS servers. |
Beta Was this translation helpful? Give feedback.
-
|
@coffeegreg temporary i have ytuner service running on. 84.170.91.69 |
Beta Was this translation helpful? Give feedback.
-
|
I thought it might be a good idea to create several discussion threads in separate languages. 🤔 I would create the following:
What do you think about that? 🤔 |
Beta Was this translation helpful? Give feedback.
-
|
I put the following setting :
- Preferred DNS AND Alternate DNS on your PIONEER X-SMC5-K to *192.168.27.10
as requested *
- *adresse IP static* :*84.170.9169 as requested *
- *subnet mask* : *255 255 255 0* *do not know what you want me to
encode there ?*
- GATEWAY "*adresse passerelle in french" * : *192.168.1.1 do not know
what you want me to encode there ?*
- *Do not use PROXY server was set*
*RESULT is SERVER ERROR display however connection wi-fi is working*
Le dim. 16 mars 2025 à 12:10, Bea de Val ***@***.***> a
écrit :
… @coffeegreg <https://github.com/coffeegreg> temporary i have ytuner
service running on.
@EMMYCO7 <https://github.com/EMMYCO7> please change your dns setup in
your radio temporarily
To, 84.170.91.69 when it worked then.. look for a Lokal ytuner instance in
your Lokal network.
84.170.91.69
—
Reply to this email directly, view it on GitHub
<#66 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BQOBF4DOEP6FFS6ADXVEDQL2UVL2BAVCNFSM6AAAAABWKLG2JCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENJRGUYTKNQ>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
--
|
Beta Was this translation helpful? Give feedback.
-
|
Yes good idea Greg :)
Le dim. 16 mars 2025 à 12:21, Greg ***@***.***> a écrit :
… I thought it might be a good idea to create several discussion threads in
separate languages. 🤔 I would create the following:
- 🇵🇱 (supported by me)
- 🇩🇪 (supported by Beatrice @TheBossME <https://github.com/TheBossME>
)
- 🇫🇷 (supported by Freddy @Freleo <https://github.com/Freleo> and
Papy Jean-Louis @PapyRadio2022 <https://github.com/PapyRadio2022>)
What do you think about that? 🤔
—
Reply to this email directly, view it on GitHub
<#66 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BQOBF4FCJINEBHOWSGXYTLL2UVNDJAVCNFSM6AAAAABWKLG2JCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENJRGUZDGMI>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
--
|
Beta Was this translation helpful? Give feedback.
-
@coffeegreg your fault. Please remove 192.168.27.10 -> this an internal example only. Will be gone in a few days / hours Too much faulty information here. |
Beta Was this translation helpful? Give feedback.
-
|
Cannot show any log document because at this stage I do not have ytuner
version.
First step should be to have and to run ytuner from my understanding.
I have anniversary this pm 😍
Good afternoon
Still error server when correcting infos as you just told me
Le dim. 16 mars 2025 à 12:54, Bea de Val ***@***.***> a
écrit :
… @EMMYCO7 <https://github.com/EMMYCO7>
- Preferred DNS AND Alternate DNS on your PIONEER X-SMC5-K to
*192.168.27.10
as requested *
- *adresse IP static* :*84.170.9169 as requested *
No, the other way around.
Set DNSs to 84.170.91.69 (Beatrice test YTuner server) and IP of your
Pioneer device to 192.168.27.10 (if you IP subnet is 192.168.27.0/24 ->
192.168.27.0 / 255.255.255.0). Gateway is usually the first address from
the subnet --> 192.168.27.1. If you use 192.168.1.0/24 subnet your YTuner
machine IP address i probably 192.168.1.10 🤔
Show us YTuner console log dump and we'll tell you abut right IP addresses
to use in your configuration.
@greg <https://github.com/greg> your fault. Please remove 192.168.27.10
-> this an internal example only. Will be gone in a few days / hours
—
Reply to this email directly, view it on GitHub
<#66 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BQOBF4BCVK3VUYEVGL7NEXL2UVQ53AVCNFSM6AAAAABWKLG2JCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENJRGU2DKNI>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
-
|
Hi Greg,
Could you please tell me if VTUNER will still be working on my
PIONNER radio by the time I paid annual fees as I saw some kind of messages
on internet ?
If yes, do you know what is the price ?
Thanks for you reply on the matter.
Le dim. 16 mars 2025 à 13:12, Colette Renaut ***@***.***> a
écrit :
… Cannot show any log document because at this stage I do not have ytuner
version.
First step should be to have and to run ytuner from my understanding.
I have anniversary this pm 😍
Good afternoon
Still error server when correcting infos as you just told me
Le dim. 16 mars 2025 à 12:54, Bea de Val ***@***.***> a
écrit :
> @EMMYCO7 <https://github.com/EMMYCO7>
>
>
> - Preferred DNS AND Alternate DNS on your PIONEER X-SMC5-K to
> *192.168.27.10
>
> as requested *
>
>
> - *adresse IP static* :*84.170.9169 as requested *
>
> No, the other way around.
>
> Set DNSs to 84.170.91.69 (Beatrice test YTuner server) and IP of your
> Pioneer device to 192.168.27.10 (if you IP subnet is 192.168.27.0/24 ->
> 192.168.27.0 / 255.255.255.0). Gateway is usually the first address from
> the subnet --> 192.168.27.1. If you use 192.168.1.0/24 subnet your
> YTuner machine IP address i probably 192.168.1.10 🤔
>
> Show us YTuner console log dump and we'll tell you abut right IP
> addresses to use in your configuration.
>
> @greg <https://github.com/greg> your fault. Please remove 192.168.27.10
> -> this an internal example only. Will be gone in a few days / hours
>
> —
> Reply to this email directly, view it on GitHub
> <#66 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/BQOBF4BCVK3VUYEVGL7NEXL2UVQ53AVCNFSM6AAAAABWKLG2JCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENJRGU2DKNI>
> .
> You are receiving this because you were mentioned.Message ID:
> ***@***.***>
>
--
|
Beta Was this translation helpful? Give feedback.
-
|
See below in green please
Le mar. 18 mars 2025 à 16:47, Bea de Val ***@***.***> a
écrit :
Hi,
is there a message on your radio, that you should pay 💰 ?? NO, not on
my radio, I said that i show that on internet
If not, you must use ytuner. But actually, You didn't answered to my
questions. 🥴 I answered that I cannot show you any LOG of YTUNER
because as a matter of fact I did not yet have YTUNER version and I totally
do not know what i have to do to run YTUNER and show you a log.
I also already answered that even when putting the number configurations
you provided to me as IP static, DNS etc, the same error message was
display - SERVER ERROR still appear on my radio.
We (include Greg) can only help, if we are working together.
…
come to my discord channel. What is your discord channel ? This is
unclear to me ? sorry for that. And I can help you directly.
Let Greg work on ytuner real. 2.x. OK I understand.
Thank you. Thanks to you
—
Reply to this email directly, view it on GitHub
<#66 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BQOBF4AEMPHB7ZZ3AODDIBL2VA5XPAVCNFSM6AAAAABWKLG2JCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENJUGA3DCNA>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
--
|
Beta Was this translation helpful? Give feedback.
-
|
YES i did last sunday
I put the following setting :
- Preferred DNS AND Alternate DNS on your PIONEER X-SMC5-K to *192.168.27.10
as requested *
- *adresse IP static* :*84.170.91.69 as requested *
- *subnet mask* : *255 255 255 0* *do not know what you want me to
encode there ?*
- GATEWAY "*adresse passerelle in french" * : *192.168.1.1 do not know
what you want me to encode there ?*
- *Do not use PROXY server was set*
*RESULT is SERVER ERROR display however connection wi-fi is working*
Le mar. 18 mars 2025 à 17:51, Bea de Val ***@***.***> a
écrit :
… @EMMYCO7 <https://github.com/EMMYCO7>
Last question:
Have you set your Radio dns records to 84.170.91.69 ?
I see no requests from your end to my ytuner instance which I actually
shared for you.
When you are not cooperating. We can't help you.
Check you Radio how To,change from DHCP default to static.
@EMMYCO7 <https://github.com/EMMYCO7> Are you reading this ?????
—
Reply to this email directly, view it on GitHub
<#66 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BQOBF4FKDIUFW6IAWE6XOYT2VBFJNAVCNFSM6AAAAABWKLG2JCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENJUGE2DGNY>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
--
|
Beta Was this translation helpful? Give feedback.
-
|
sorry the opposite for dns ... i took the wrong copy paste
Le mar. 18 mars 2025 à 18:02, Colette Renaut ***@***.***> a
écrit :
… YES i did last sunday
I put the following setting :
- Preferred DNS AND Alternate DNS on your PIONEER X-SMC5-K to *192.168.27.10
as requested *
- *adresse IP static* :*84.170.91.69 as requested *
- *subnet mask* : *255 255 255 0* *do not know what you want me to
encode there ?*
- GATEWAY "*adresse passerelle in french" * : *192.168.1.1 do not
know what you want me to encode there ?*
- *Do not use PROXY server was set*
*RESULT is SERVER ERROR display however connection wi-fi is working*
Le mar. 18 mars 2025 à 17:51, Bea de Val ***@***.***> a
écrit :
> @EMMYCO7 <https://github.com/EMMYCO7>
>
> Last question:
> Have you set your Radio dns records to 84.170.91.69 ?
>
> I see no requests from your end to my ytuner instance which I actually
> shared for you.
>
> When you are not cooperating. We can't help you.
>
> Check you Radio how To,change from DHCP default to static.
>
> @EMMYCO7 <https://github.com/EMMYCO7> Are you reading this ?????
>
> —
> Reply to this email directly, view it on GitHub
> <#66 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/BQOBF4FKDIUFW6IAWE6XOYT2VBFJNAVCNFSM6AAAAABWKLG2JCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENJUGE2DGNY>
> .
> You are receiving this because you were mentioned.Message ID:
> ***@***.***>
>
--
--
|
Beta Was this translation helpful? Give feedback.
-
|
As i just said i took the wrong copy paste of settings ... so the next
setting were well encoded as requested as both DNS values
Again I put the following setting right now:
- Preferred DNS AND Alternate DNS on PIONEER X-SMC5-K set to *
84.170.91.69 as requested *
- *adresse IP static* :* 192.168.27.10 as requested *
- *subnet mask* : *255 255 255 0* as usual as I *do not know what you
want me to encode there ?*
- GATEWAY "*adresse passerelle in french" * : *192.168.27.10 because i
do not know what you want me to encode there ?*
- *Do not use PROXY server was set as usual*
- *DHCP hors service choosen*
*RESULT is SERVER ERROR display however connection wi-fi is working*
Le mar. 18 mars 2025 à 18:23, Bea de Val ***@***.***> a
écrit :
… you're goin failed !
How many times do I have to explain?
that the DNS address on the radio should be set to
84.170.91.69 and not local like mine !!!
should be set to ????!!!!
I'm slowly losing my patience !!!
Combien de fois dois-je expliquer,
Que pour le test prévu, l'adresse DNS de la radio doit être réglée sur
84.170.91.69 et non pas Local comme chez moi !
Il faut régler ? ???!!!!
Je commence à perdre patience ! !!
Ile razy mam tłumaczyć?
że adres DNS w radiu dla planowanego testu powinien być ustawiony na
84.170.91.69 a nie lokalny jak mój !!!
ma być ustawiony na ????!!!!
Powoli tracę cierpliwość !!!
—
Reply to this email directly, view it on GitHub
<#66 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BQOBF4GUYWTDBZ3OMTI7XCD2VBJCLAVCNFSM6AAAAABWKLG2JCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENJUGE4DINQ>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
--
|
Beta Was this translation helpful? Give feedback.
-
|
Hi,
I join on discord as you mentioned Bea.
I create EMMYCO7 server.
Could you then be so kind to explain me what I have to do as next steps.
Best regards
Colette
Le mar. 18 mars 2025 à 19:19, Bea de Val ***@***.***> a
écrit :
… https://discord.com/channels/1189527693310562347/1189530697153654794
Join here !.
—
Reply to this email directly, view it on GitHub
<#66 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BQOBF4G3IHNRBBWJJLSBSUT2VBPRJAVCNFSM6AAAAABWKLG2JCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENJUGIZTQMI>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
--
|
Beta Was this translation helpful? Give feedback.
-
|
Huge millions of thanks to both of you !!!!! 🤩🥰 !!!!!
Le lun. 24 mars 2025 à 17:34, Bea de Val ***@***.***> a
écrit :
… @coffeegreg <https://github.com/coffeegreg> Good information from @EMMYCO7
<https://github.com/EMMYCO7>
Her Pioneer radio is working with ytuner now with the shared ip adress
🙋♀️🫶🙏
—
Reply to this email directly, view it on GitHub
<#66 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/BQOBF4E5QLJMYZ55ISUS7SL2WAX3DAVCNFSM6AAAAABWKLG2JCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENRQGQ4DIMI>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
--
|
Beta Was this translation helpful? Give feedback.
-
|
Hello together, Any solution for internet radio on TEAC CR-H700 ? If yes, please send the guide lines and I will make a donation. Thanks |
Beta Was this translation helpful? Give feedback.
-
|
Strange ...Suddenly I am receving the following error: DNS Server error: Could not bind socket.
|
Beta Was this translation helpful? Give feedback.
-
|
Port 53 was not in use.
pi@raspberrypi:~/ytuner-1.2.6-armhf-linux-rpi-2-4 $ sudo ./ytuner
YTuner v1.2.6 Copyright (c) 2024 Greg P. (https://github.com/coffeegreg)
14-4-25 20:42:24 : Inf : Starting services...
14-4-25 20:42:24 : Inf : Successfully loaded 10 my stations.
14-4-25 20:42:24 : Inf : Getting Radio-browser.info UUIDs...
14-4-25 20:42:24 : Dbg : Radio-browser.info: GET stations.
14-4-25 20:42:24 : Inf : DNS Service: listening on: 192.168.1.51:53.
14-4-25 20:42:24 : Inf : Web Service: listening on: 192.168.1.51:80.
14-4-25 20:42:31 : Dbg : DNS Query intercept : teac.vtuner.com.
14-4-25 20:42:39 : Dbg : DNS Query intercept : teac.vtuner.com.
14-4-25 20:42:42 : Dbg : DNS Query intercept : teac2.vtuner.com.
14-4-25 20:42:46 : Dbg : DNS Query intercept : teac2.vtuner.com.
14-4-25 20:42:50 : Dbg : DNS Query intercept : teac2.vtuner.com.
14-4-25 20:42:56 : Dbg : DNS Query intercept : teac.vtuner.com.
14-4-25 20:42:59 : Dbg : DNS Query intercept : teac2.vtuner.com.
14-4-25 20:43:16 : Dbg : DNS Query intercept : teac2.vtuner.com.
14-4-25 20:43:29 : Dbg : DNS Query intercept : teac.vtuner.com.
14-4-25 20:43:49 : Dbg : DNS Query intercept : teac2.vtuner.com.
14-4-25 20:44:04 : Inf : Successfully downloaded 54820 RB UUIDs.
14-4-25 20:44:04 : Inf : Successfully saved 54820 RB UUIDs to cache file.
14-4-25 20:44:34 : Dbg : DNS Query intercept : teac.vtuner.com.
14-4-25 20:44:54 : Dbg : DNS Query intercept : teac2.vtuner.com.
|
Beta Was this translation helpful? Give feedback.
-
|
OK. It is working now. My receiver is back with the service (internet radio) which draw my attention when I bought it. Thank you for ytuner ! |
Beta Was this translation helpful? Give feedback.
-
|
Hi ! Suddenly I cannot connect to ytuner on my receiver. I checked the server side (Raspberry Pi) and I see that the ytuner is listening on port 53 (instead of 50) and on port 80. Do you know what have changed port 50 to port 53 ?
root@raspberrypi:~# ss -tulpn | grep ytuner
udp UNCONN 0 0 192.168.1.51:53 0.0.0.0:* users:(("ytuner",pid=651,fd=3))
tcp LISTEN 0 5 192.168.1.51:80 0.0.0.0:* users:(("ytuner",pid=651,fd=5))
tcp LISTEN 0 15 0.0.0.0:53 0.0.0.0:* users:(("ytuner",pid=651,fd=4))
root@raspberrypi:~# lsof -i -P -n | grep LISTEN
ytuner 651 root 4u IPv4 18091 0t0 TCP *:53 (LISTEN)
ytuner 651 root 5u IPv4 18092 0t0 TCP 192.168.1.51:80 (LISTEN)
Thank you |
Beta Was this translation helpful? Give feedback.


Uh oh!
There was an error while loading. Please reload this page.
-
vTuner stops providing services for more and more devices. 😞
Let's help each other! 👍 Tell or write to others about YTuner if you can and help others to bring their devices back to life! 🚀
Beta Was this translation helpful? Give feedback.
All reactions