Samsung SSD 850 EVO 250GB

[bruno-knops]

"Samsung SSD 850 EVO 250G B*" 190 C "Samsung Evo 850"

sudo hddtemp --debug /dev/sda

================= hddtemp 0.3-beta15 ==================
Model: Samsung SSD 850 EVO 250G B �@

field(5) = 0
field(9) = 148
field(12) = 22
field(177) = 26
field(179) = 0
field(181) = 0
field(182) = 0
field(183) = 0
field(187) = 0
field(190) = 33 <--
field(195) = 0
field(199) = 0
field(235) = 12
field(241) = 234

If one of the field value seems to match the temperature, be sure to read
the hddtemp man page before sending a report (section REPORT). Thanks.

sudo smartctl -x /dev/sda

smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.34-1-pve] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: Samsung SSD 850 EVO 250GB
Serial Number: S2R6NX0J734418T
LU WWN Device Id: 5 002538 d421abcec
Firmware Version: EMT02B6Q
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Aug 1 00:00:02 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 133) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 095 095 000 - 23444
12 Power_Cycle_Count -O--CK 099 099 000 - 22
177 Wear_Leveling_Count PO--C- 098 098 000 - 26
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
183 Runtime_Bad_Block PO--C- 100 100 010 - 0
187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O--CK 066 053 000 - 34
195 ECC_Error_Rate -O-RC- 200 200 000 - 0
199 CRC_Error_Count -OSRCK 100 100 000 - 0
235 POR_Recovery_Count -O--C- 099 099 000 - 12
241 Total_LBAs_Written -O--CK 099 099 000 - 27707773994
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning

General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 SL VS 16 Device vendor specific log
0xa5 SL VS 16 Device vendor specific log
0xce SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer

SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
255 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: ?/35 Celsius
Lifetime Min/Max Temperature: 24/40 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/70 Celsius
Temperature History Size (Index): 128 (30)

Index Estimated Time Temperature Celsius
31 2020-07-31 02:50 31 ************
32 2020-07-31 03:00 32 *************
33 2020-07-31 03:10 31 ************
34 2020-07-31 03:20 34 ***************
35 2020-07-31 03:30 30 ***********
36 2020-07-31 03:40 30 ***********
37 2020-07-31 03:50 30 ***********
38 2020-07-31 04:00 29 **********
39 2020-07-31 04:10 31 ************
40 2020-07-31 04:20 30 ***********
41 2020-07-31 04:30 31 ************
42 2020-07-31 04:40 29 **********
... ..( 9 skipped). .. **********
52 2020-07-31 06:20 29 **********
53 2020-07-31 06:30 31 ************
54 2020-07-31 06:40 29 **********
55 2020-07-31 06:50 30 ***********
56 2020-07-31 07:00 29 **********
57 2020-07-31 07:10 29 **********
58 2020-07-31 07:20 29 **********
59 2020-07-31 07:30 30 ***********
60 2020-07-31 07:40 29 **********
61 2020-07-31 07:50 30 ***********
62 2020-07-31 08:00 29 **********
63 2020-07-31 08:10 30 ***********
64 2020-07-31 08:20 29 **********
... ..( 2 skipped). .. **********
67 2020-07-31 08:50 29 **********
68 2020-07-31 09:00 30 ***********
69 2020-07-31 09:10 29 **********
70 2020-07-31 09:20 28 *********
71 2020-07-31 09:30 29 **********
72 2020-07-31 09:40 30 ***********
73 2020-07-31 09:50 34 ***************
74 2020-07-31 10:00 32 *************
75 2020-07-31 10:10 30 ***********
76 2020-07-31 10:20 29 **********
77 2020-07-31 10:30 30 ***********
78 2020-07-31 10:40 29 **********
79 2020-07-31 10:50 30 ***********
80 2020-07-31 11:00 29 **********
... ..( 4 skipped). .. **********
85 2020-07-31 11:50 29 **********
86 2020-07-31 12:00 28 *********
87 2020-07-31 12:10 29 **********
88 2020-07-31 12:20 30 ***********
89 2020-07-31 12:30 29 **********
... ..( 6 skipped). .. **********
96 2020-07-31 13:40 29 **********
97 2020-07-31 13:50 28 *********
98 2020-07-31 14:00 29 **********
99 2020-07-31 14:10 30 ***********
100 2020-07-31 14:20 29 **********
101 2020-07-31 14:30 28 *********
102 2020-07-31 14:40 29 **********
103 2020-07-31 14:50 30 ***********
104 2020-07-31 15:00 29 **********
... ..( 5 skipped). .. **********
110 2020-07-31 16:00 29 **********
111 2020-07-31 16:10 28 *********
112 2020-07-31 16:20 29 **********
113 2020-07-31 16:30 29 **********
114 2020-07-31 16:40 30 ***********
115 2020-07-31 16:50 29 **********
116 2020-07-31 17:00 29 **********
117 2020-07-31 17:10 29 **********
118 2020-07-31 17:20 28 *********
119 2020-07-31 17:30 29 **********
120 2020-07-31 17:40 29 **********
121 2020-07-31 17:50 29 **********
122 2020-07-31 18:00 30 ***********
123 2020-07-31 18:10 29 **********
124 2020-07-31 18:20 29 **********
125 2020-07-31 18:30 28 *********
126 2020-07-31 18:40 29 **********
127 2020-07-31 18:50 29 **********
0 2020-07-31 19:00 28 *********
1 2020-07-31 19:10 29 **********
2 2020-07-31 19:20 28 *********
3 2020-07-31 19:30 28 *********
4 2020-07-31 19:40 27 ********
5 2020-07-31 19:50 27 ********
6 2020-07-31 20:00 27 ********
7 2020-07-31 20:10 28 *********
8 2020-07-31 20:20 ? -
... ..( 9 skipped). .. -
18 2020-07-31 22:00 ? -
19 2020-07-31 22:10 33 **************
20 2020-07-31 22:20 33 **************
21 2020-07-31 22:30 33 **************
22 2020-07-31 22:40 32 *************
23 2020-07-31 22:50 33 **************
24 2020-07-31 23:00 33 **************
25 2020-07-31 23:10 34 ***************
26 2020-07-31 23:20 33 **************
27 2020-07-31 23:30 34 ***************
28 2020-07-31 23:40 35 ****************
29 2020-07-31 23:50 34 ***************
30 2020-08-01 00:00 34 ***************

SCT Error Recovery Control:
Read: Disabled
Write: Disabled

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 10 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC

sudo hdparm -i /dev/sda

/dev/sda:

Model=Samsung SSD 850 EVO 250GB, FwRev=EMT02B6Q, SerialNo=S2R6NX0J734418T
Config={ Fixed }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=unknown, MaxMultSect=1, MultSect=1
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=488397168
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 *udma6
AdvancedPM=no WriteCache=enabled
Drive conforms to: unknown: ATA/ATAPI-2,3,4,5,6,7

• signifies the current active mode

Hope this is the information you need and it helps, if you need more, please contact me.

[intera91]

same issue here with the 500GB

WARNING: Drive /dev/sda doesn't seem to have a temperature sensor.
WARNING: This doesn't mean it hasn't got one.
WARNING: If you are sure it has one, please contact me (hddtemp@guzu.net).
WARNING: See --help, --debug and --drivebase options.
/dev/sda: Samsung SSD 860 EVO 500G B ���@: no sensor

smartctl output (abr.)

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 099 099 000 - 1652
12 Power_Cycle_Count -O--CK 099 099 000 - 10
177 Wear_Leveling_Count PO--C- 099 099 000 - 4
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
183 Runtime_Bad_Block PO--C- 100 100 010 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O--CK 069 050 000 - 31
195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
235 Unknown_Attribute -O--C- 099 099 000 - 4
241 Total_LBAs_Written -O--CK 099 099 000 - 3665803311
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning

OS: Debian 10 updated to current packages

[Shanghai-Tom]

I have Samsung SSD 860 EVO 1TB and the temperature is also in field 190

[Luki72]

And the same here with 870 EVO 50GB @ Debian testing:

WARNING: Drive /dev/sda doesn't seem to have a temperature sensor.
WARNING: This doesn't mean it hasn't got one.
WARNING: If you are sure it has one, please contact me (hddtemp@guzu.net).
WARNING: See --help, --debug and --drivebase options.
/dev/sda: Samsung SSD 870 EVO 500G B              �@:  no sensor

After addig it to /etc/hddtemp.db like this

"Samsung SSD 870 EVO 500G"    190   C "Samsung SSD 870 EVO 500GB"

the result is

/dev/sda: Samsung SSD 870 EVO 500G B              �@: 35°C

S.M.A.R.T. info:

Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       128
 12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       29
177 Wear_Leveling_Count     0x0013   099   099   000    Pre-fail  Always       -       1
179 Used_Rsvd_Blk_Cnt_Tot   0x0013   100   100   010    Pre-fail  Always       -       0
181 Program_Fail_Cnt_Total  0x0032   100   100   010    Old_age   Always       -       0
182 Erase_Fail_Count_Total  0x0032   100   100   010    Old_age   Always       -       0
183 Runtime_Bad_Block       0x0013   100   100   010    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0032   065   051   000    Old_age   Always       -       35
195 Hardware_ECC_Recovered  0x001a   200   200   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x003e   100   100   000    Old_age   Always       -       0
235 Unknown_Attribute       0x0012   099   099   000    Old_age   Always       -       3
241 Total_LBAs_Written      0x0032   099   099   000    Old_age   Always       -       1366353481

Package(s):

ii  hddtemp        0.3-beta15-54 amd64        hard drive temperature monitoring utility

[Batwam]

same with the 860, it is recognised if I include the following to the db (note that the "B" in GB needs to be omitted):
"Samsung SSD 860 EVO 500G" 190 C "Samsung SSD 860 EVO 500GB"

[bortek]

Which of the fields are actually showing the right temp?

ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
190 Airflow_Temperature_Cel -O--CK 066 053 000 - 34

In my syslog it says

Device: /dev/sda [SAT], SMART Usage Attribute: 190 Airflow_Temperature_Cel changed from 66 to 65

which would then be the VALUE field that is a real temp and not RAW_VALUE

???

[Shanghai-Tom]

The Value field agrees with separately obtained data from smartmontools on my Samsung SSD's

However, on a my Crucial ssd its field RAW_VALUE from smartctl that matched the value from hddtemp of 40C, which given the overall temp readings of cpu, gpu, and an nvme pcie are around 60C , is the incorrect field for this disk.

ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
194 Temperature_Celsius -O---K 060 043 000 - 40 (Min/Max 25/57)

Regards,Tom.