Add "Samsung SSD 830 Series" drive

[chris6868]

SAMSUNG MZMPC128HBFU-000 在使用hddtemp的时候报no sensor，但在Windows下能正常获取温度信息。
Samsung mzmpc128hbfu-000 reports no sensor when using hddtemp, but it can normally obtain temperature information under windows.

root@pve:~# hddtemp /dev/sd?
WARNING: Drive /dev/sda doesn't seem to have a temperature sensor.
WARNING: This doesn't mean it hasn't got one.
WARNING: If you are sure it has one, please contact me (hddtemp@guzu.net).
WARNING: See --help, --debug and --drivebase options.
/dev/sda: SAMSUNG MZMPC128HBFU-000 : no sensor

[vitlav]

Please send
# hddtemp /dev/sda --debug
and
# smartctl -a /dev/sda
(from smartmontools package)
if possible

[chris6868]

root@pve:~# hddtemp /dev/sda --debug

================= hddtemp 0.3-beta15 ==================
Model: SAMSUNG MZMPC128HBFU-000

field(5) = 0
field(9) = 216
field(12) = 70
field(177) = 6
field(179) = 0
field(181) = 0
field(182) = 0
field(183) = 0
field(187) = 0
field(190) = 51
field(195) = 0
field(199) = 0
field(235) = 60
field(241) = 9

If one of the field value seems to match the temperature, be sure to read
the hddtemp man page before sending a report (section REPORT). Thanks.
root@pve:~# smartctl -a /dev/sda
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.30-2-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG MZMPC128HBFU-000
Serial Number: S0YLNYAC205818
LU WWN Device Id: 5 002538 043584d30
Firmware Version: CXM03B1Q
User Capacity: 128,035,676,160 bytes [128 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 T13/2015-D revision 2
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Aug 15 19:06:51 2022 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 540) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 9) minutes.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 728
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 70
177 Wear_Leveling_Count 0x0013 099 099 000 Pre-fail Always - 6
179 Used_Rsvd_Blk_Cnt_Tot 0x0013 100 100 010 Pre-fail Always - 0
181 Program_Fail_Cnt_Total 0x0032 100 100 010 Old_age Always - 0
182 Erase_Fail_Count_Total 0x0032 100 100 010 Old_age Always - 0
183 Runtime_Bad_Block 0x0013 100 100 010 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0032 048 031 000 Old_age Always - 52
195 Hardware_ECC_Recovered 0x001a 200 200 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x003e 253 253 000 Old_age Always - 0
235 Unknown_Attribute 0x0012 099 099 000 Old_age Always - 60
241 Total_LBAs_Written 0x0032 099 099 000 Old_age Always - 457310361

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Please send
# hddtemp /dev/sda --debug
and
# smartctl -a /dev/sda
(from smartmontools package)
if possible