tubeszb-cc2652p2-poe-2023 how to flash "router" firmware

[Bloodpack]

Hello,

i need some help.
i need to flash my tubeszb-cc2652p2-poe-2023 from coordinator to router firmware and i have no clue how i need to do it.

can i have some help please?

[tube0013]

If you use HAOS with addons I have an addon that can do it.

https://github.com/tube0013/tubeszb_addons

You can point it to a custom url for the firmware and use the latest release from the z-stack repository:

https://github.com/Koenkk/Z-Stack-firmware/releases/download/Z-Stack_3.x.0_router_20250403/CC1352P2_CC2652P_launchpad_router_20250403.zip

[Bloodpack]

Hello and thanks for the answer....

i tried with the TubesZB TI CC2652 FW Flasher addon in HAOS but no matter what i do it does not get the custom URL i set up,

here is how i set it up:

and here is what i get in the log when i run the flasher:

-----------------------------------------------------------
 Add-on: TubesZB TI CC2652 FW Flasher
 TubesZB TI CC2652 firmware flasher add-on
-----------------------------------------------------------
 Add-on version: 0.4.1.1
 You are running the latest version of this add-on.
 System: Home Assistant OS 16.0  (amd64 / qemux86-64)
 Home Assistant Core: 2025.7.3
 Home Assistant Supervisor: 2025.07.1
-----------------------------------------------------------
 Please, share the above information when looking for help
 or support in, e.g., GitHub, forums or the Discord chat.
-----------------------------------------------------------
s6-rc: info: service banner successfully started
s6-rc: info: service cc2652-flasher: starting
[21:51:20] INFO: Using Network Device  192.168.178.198:6638
[21:51:21] INFO: Downloading  https://github.com/tube0013/tubeszb_addons/raw/main/tzb-cc2652-flasher/firmware/CC1352P2_CC2652P_launchpad_coordinator_20240710.zip
[21:51:21] INFO: Triggering Bootloader mode on 192.168.178.198
[21:51:29] INFO: Starting CC2652P flasher with socket://192.168.178.198:6638
Opening port socket://192.168.178.198:6638, baud 500000
Reading data from /root/firmware.hex
Your firmware looks like an Intel Hex file
Connecting to target...
CC1350 PG2.0 (7x7mm): 352KB Flash, 20KB SRAM, CCFG.BL_CONFIG at 0x00057FD8

is there maybe a bug or is the URL hardcoded in the docker container?

i found your explanation on how to do it via the Network and cc2538-bsl and it worked just fine

Thank you very much for your help and very good documentation