Building v4.4

[Rooo6]

Trying to build the project (v4.4) i'm getting error messages:
Version 4.3 worked for me and could be installed on esp32-dev

`Processing esp32-dev (platform: espressif32@~6.8.1; board: esp32dev; framework: arduino)

Verbose mode can be enabled via -v, --verbose option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32dev.html
PLATFORM: Espressif 32 (6.8.1) > Espressif ESP32 Dev Module
HARDWARE: ESP32 240MHz, 320KB RAM, 4MB Flash
DEBUG: Current (esp-prog) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES:

• framework-arduinoespressif32 @ 3.20017.0 (2.0.17)
• tool-esptoolpy @ 1.40501.0 (4.5.1)
• tool-mkfatfs @ 2.0.1
• tool-mklittlefs @ 1.203.210628 (2.3)
• tool-mkspiffs @ 2.230.0 (2.30)
• toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5
  LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
  LDF Modes: Finder ~ chain, Compatibility ~ soft
  Found 46 compatible libraries
  Scanning dependencies...
  Dependency Graph
  |-- ArduinoJson @ 6.19.3
  |-- ESP8266_SSD1306 @ 4.0.0
  |-- NimBLE-Arduino @ 1.4.2
  |-- AsyncTCP @ 1.1.1+sha.ca8ac5f
  |-- ESP Async WebServer @ 1.2.3+sha.43381ab
  |-- FS @ 2.0.0
  |-- LittleFS @ 2.0.0
  |-- SPIFFS @ 2.0.0
  |-- WiFi @ 2.0.0
  |-- ArduinoOTA @ 2.0.0
  |-- ESPmDNS @ 2.0.0
  |-- OneWire @ 2.3.7
  |-- HTTPClient @ 2.0.0
  |-- WiFiClientSecure @ 2.0.0
  |-- Wire @ 2.0.0
  |-- WebServer @ 2.0.0
  |-- PolynomialRegression
  |-- DNSServer @ 2.0.0
  |-- Adafruit ADS1X15 @ 1.0.1
  |-- AsyncMqttClient @ 0.8.2
  |-- Adafruit BME280 Library @ 2.1.2
  |-- Adafruit Unified Sensor @ 1.1.4
  |-- Update @ 2.0.0
  |-- DHT sensor library @ 1.4.0
  |-- EEPROM @ 2.0.0
  Building in release mode
  Compiling .pio\build\esp32-dev\src\Actuator.cpp.o
  Compiling .pio\build\esp32-dev\src\ActuatorArduinoPin.cpp.o
  Compiling .pio\build\esp32-dev\src\ArduinoFunctions.cpp.o
  Compiling .pio\build\esp32-dev\src\AutoCapControl.cpp.o
  Compiling .pio\build\esp32-dev\src\BPLSettings.cpp.o
  Compiling .pio\build\esp32-dev\src\BleListener.cpp.o
  Compiling .pio\build\esp32-dev\src\BlePillListener.cpp.o
  Compiling .pio\build\esp32-dev\src\BleSensorListener.cpp.o
  Compiling .pio\build\esp32-dev\src\BleTiltListener.cpp.o
  Compiling .pio\build\esp32-dev\src\BrewKeeper.cpp.o
  Compiling .pio\build\esp32-dev\src\BrewLogger.cpp.o
  Compiling .pio\build\esp32-dev\src\BrewPiLess.cpp.o
  Compiling .pio\build\esp32-dev\src\BrewPiProxy.cpp.o
  Compiling .pio\build\esp32-dev\src\Brewpi.cpp.o
  Compiling .pio\build\esp32-dev\src\BrewpiStrings.cpp.o
  Compiling .pio\build\esp32-dev\src\Buzzer.cpp.o
  Compiling .pio\build\esp32-dev\src\DS2413.cpp.o
  Compiling .pio\build\esp32-dev\src\DallasTemperature.cpp.o
  Compiling .pio\build\esp32-dev\src\DataLogger.cpp.o
  Compiling .pio\build\esp32-dev\src\DeviceManager.cpp.o
  Compiling .pio\build\esp32-dev\src\Display.cpp.o
  Compiling .pio\build\esp32-dev\src\DisplayIspindel.cpp.o
  Compiling .pio\build\esp32-dev\src\DisplayLcd.cpp.o
  Compiling .pio\build\esp32-dev\src\ESP32HTTPUpdateServer.cpp.o
  Compiling .pio\build\esp32-dev\src\ESPUpdateServer.cpp.o
  Compiling .pio\build\esp32-dev\src\EepromManager.cpp.o
  src/BrewPiLess.cpp: In function 'void brewpi_setup()':
  src/BrewPiLess.cpp:1706:11: error: 'sensorPowerPin' was not declared in this scope
  pinMode(sensorPowerPin, OUTPUT); // Power for sonoff temp sensor
  ^~~~~~~~~~~~~~
  src/BrewPiLess.cpp:1708:11: error: 'powerIndicatorPin' was not declared in this scope
  pinMode(powerIndicatorPin, OUTPUT);
  ^~~~~~~~~~~~~~~~~
  *** [.pio\build\esp32-dev\src\BrewPiLess.cpp.o] Error 1
  ========================================= [FAILED] Took 15.35 seconds =========================================

Environment Status Duration

---

esp32-dev FAILED 00:00:15.350
==================================== 1 failed, 0 succeeded in 00:00:15.350 ====================================

• The terminal process "C:\Users\rooo6.platformio\penv\Scripts\platformio.exe 'run', '--target', 'upload', '--environment', 'esp32-dev'" terminated with exit code: 1.
• Terminal will be reused by tasks, press any key to close it. `

[ce-designs]

I can confirm that building the current master branch is not possible. I get the exact same errors.

[roglioburigo]

Find all code with if (SONOFF_NEWGEN) blocks and change to #if SONOFF_NEWGEN, idk if it is the best way to solve, but I think this will solve both problems.
Eg.: src\TempControl.cpp
before
if (SONOFF_NEWGEN) { pinMode(relayIndicatorPin, OUTPUT); }
After
#if SONOFF_NEWGEN pinMode(relayIndicatorPin, OUTPUT); #endif

I`ve create a pull request with the fix

#448

[dumpamob]

other errors on ESP8266

....
src\BrewPiLess.cpp: In member function 'virtual void BrewPiWebHandler::handleRequest(AsyncWebServerRequest*)': src\BrewPiLess.cpp:540:12: error: 'class ESP8266WiFiClass' has no member named 'eraseAP' 540 | WiFi.eraseAP(); | ^~~~~~~ src\BrewPiLess.cpp:554:12: error: 'class ESP8266WiFiClass' has no member named 'eraseAP' 554 | WiFi.eraseAP(); // https://github.com/espressif/arduino-esp32/issues/8976 | ^~~~~~~ src\BrewPiLess.cpp: In function 'void brewpi_setup()': src\BrewPiLess.cpp:1706:11: error: 'sensorPowerPin' was not declared in this scope 1706 | pinMode(sensorPowerPin, OUTPUT); // Power for sonoff temp sensor | ^~~~~~~~~~~~~~ src\BrewPiLess.cpp:1708:11: error: 'powerIndicatorPin' was not declared in this scope 1708 | pinMode(powerIndicatorPin, OUTPUT); | ^~~~~~~~~~~~~~~~~ Compiling .pio\build\esp8266-oled\src\DisplayLcd.cpp.o src\DS2413.cpp: In member function 'byte DS2413::accessRead(uint8_t)': src\DS2413.cpp:50:25: warning: suggest parentheses around operand of '!' or change '&' to '&&' or '!' to '~' [-Wparentheses] 50 | success = (data>>4)==(!data&0xF); | ^~~~~ Compiling .pio\build\esp8266-oled\src\ESP32HTTPUpdateServer.cpp.o Compiling .pio\build\esp8266-oled\src\ESPUpdateServer.cpp.o *** [.pio\build\esp8266-oled\src\BrewPiLess.cpp.o] Error 1 src\DeviceManager.cpp: In static member function 'static void* DeviceManager::createDevice(DeviceConfig&, DeviceType)': src\DeviceManager.cpp:137:9: warning: enumeration value 'DEVICE_HARDWARE_BME280' not handled in switch [-Wswitch] 137 | switch (config.deviceHardware) { | ^ src\DeviceManager.cpp:137:9: warning: enumeration value 'DEVICE_HARDWARE_BTHOME_HUMIDITY' not handled in switch [-Wswitch] src\DeviceManager.cpp:137:9: warning: enumeration value 'DEVICE_HARDWARE_BTHOME_THERMOMETER' not handled in switch [-Wswitch]