LoRa has opened up a realm of possibilities for IoT and the transmission of digital signals across long ranges. Currently, it's very difficult to find open-source mesh networking for LoRa that supports IPv4 and application data. This project aims to provide a simple mesh network for LoRa devices that route IP traffic to a local interface, built entirely using Rust.
This is quite useful if you want to set up a network of devices and manage them remotely or use existing IP protocols to interact with your applications.
This software is not ready for production use yet.
Running the application requires root permissions. Standing up a node is as simple as:
sudo ./loramesh
This creates a node with ID 0 and a local network interface loratun0 that you can use to send
and receive packets in the network.
You can configure the node by creating a /etc/loramesh/conf.yml file, a sample is included in the
conf/ directory of this repository. Configuration can also be passed as env, such as LOMESH_DEBUG=true.
Each node deployed on a network must have a unique ID between 0-255.
Each network should only have one gateway. Theoretically because the IP address are currently hardcoded
to each node ID, like 172.16.0.<ID>, then multiple gateways may not be an issue.
The protocol is very naive and asynchronous in nature. Only IPv4 packets are supported and are not guaranteed delivery. It is recommended that users stick to UDP and assume lossy connections.
Users will still need to respect their local laws regarding radio transmissions.
Software has only been tested on Linux X86_64 and raspberry pi.
All transmissions are single channel and while some safeguards have been taken to prevent collisions this is more difficult as the network size increase.
Currently using LoRa Mesh for accessing the outside internet through a gateway is unsupported. You may be able to configure the gateway to route DNS queries and requests with custom software. Currently it functions as a private network.
Gateways currently do not save their state, this could be an issue for unreliable nodes.
- Generic interface
- Local network tunnel
- Bridge radio and tunnel
- Packet chunking
- Node discovery
- Message protocol
- Gateway DHCP
- Multi-hop routing
- Network failure recovery
- Frame lz4 compression (WIP)
- RTS/CTS collision prevention
- Multiple LoRa device hardware
- Security and encryption (WIP)
- Support 65,536 nodes (WIP)
- Add Support for IPv6 Devices and Networks