This case feeder is designed for the Hornady Lock-n-Load AP progressive reloading press. It works with virtually any caliber that will fit down Lee case feeder tubes, from 380 ACP to 30-06.
Demo of press in action: https://www.youtube.com/watch?v=Jn4G6Q33BeE
- Can handle any case length between 17mm and 63mm in length, and between 7 and 13.5mm in diameter
- Case dropper with hinged doors to quickly change calibers, no need for different caliber inserts
- Collator with 6 tubes holds over 100 cases of 9mm or 45 ACP
- Lower slider is quickly removable for hand-feeding cases, and can be stored on the back of the case feeder assembly
Most parts can be sourced from a local hardware store, and can all be easily sourced online. The ball detent is optional, and a 3d printable plastic detent STL file is included which can be used in it's place if desired.
- M4x25mm Screw (8)
- M4x15mm Screw (1)
- M4 Lock Nut (1)
- M3x50 Screw (2)
- 1/4-20 x 6" Bolt (1)
- 1/4-20 Nut (1)
- 1/4-20 x 3/4" Bolt (2)
- 1/4" Fender Washer (2)
- 624 Bearing (1)
- Hillman #6 Spring (1) (https://www.farmandfleet.com/products/512679-hillman-6-spring.html)
- Hillman #9 Spring (1) (https://www.farmandfleet.com/products/512680-hillman-9-spring.html)
- 6mm ball detent assembly (optional) (https://www.amazon.com/dp/B07CCN8WWJ)
- Lee Case Feeder 7 Tube Set (1) (https://www.amazon.com/dp/B000N8JWEO)
- PETG is recommended, but PLA should work as well
- ~0.24 Layer height, with ~40%+ infill for strength
- STL files are all rotated for correct printing orientation
- Supports are not needed except for a small amount on the lower slider nose
All files needed to print the standard configuration are in the Base STL Files folder. This includes everything needed to complete the case feeder. For custom configurations such as using with a motorized case collator, files are available in the Mods folder.
See the wiki page for assembly instructions at https://github.com/hasbridge/super-case-feeder/wiki/Assembly-Instructions
You are free to print and modify the files for personal, non-commercial use. Selling copies or printed parts is not authorized without explicit permission from the original author.